FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
info | |
2013 - Sub-Compact 1 Series, Sub-Compact Utility tractor | |
Previous model: | John Deere 1026R |
Production | |
Manufacturer: | John Deere |
Factory: | Augusta, Georgia, USA |
Original price (USD), $13,361 (2013 ), $14,301 (2019 ), |
Capacity | |
Fuel: | 5.6 gal [21.2 L] |
Hydraulic system: | 3.25 gal [12.3 L] |
Front axle: | 2.5 qts [2.4 L] |
3-Point Hitch | |
Rear Type: | 1 (limited) |
Control: | position control |
Rear lift (at 24"/610mm): | 681 lbs [308 kg] |
Power Take-off (PTO) | |
Rear PTO: | independent |
Clutch: | wet disc |
Rear RPM: | 540 |
Mid PTO: | independent |
Mid RPM: | 2100 |
Dimensions & Tires | |
Wheelbase: | 57.1 inches [145 cm] |
Weight: | 1444 lbs [654 kg] |
1025R Serial Numbers | |
Location: | Serial number plate on the right side of the 1025R frame, above the front axle. |
John Deere 1025R Power | |
Engine: | 23.8 hp [17.7 kW] |
PTO (claimed): | 18 hp [13.4 kW] |
Mechanical | |
Chassis: | 4x4 MFWD 4WD |
Final drives: | spur gear |
Differential lock: | rear standard |
Steering: | power |
Brakes: | wet disc |
Cab: | Two-post foldable ROPS on semi-flat platform. |
Hydraulics | |
Type: | open center |
Capacity: | 3.25 gal [12.3 L] |
Pressure: | 2000 psi [137.9 bar] |
Valves: | 2 or 3 |
Pump flow: | 3.5 gpm [13.2 lpm] |
Total flow: | 6.3 gpm [23.8 lpm] |
Steering flow: | 2.8 gpm [10.6 lpm] |
Electrical | |
Ground: | negative |
Battery | |
Number: | 1 |
Cold-cranking amps: | 500 |
Volts: | 12 |
info | |
Bore/Stroke: | 3.15x3.31 inches [80 x 84 mm] |
Emissions: | Tier 4 |
Power: | 23.8 hp [17.7 kW] |
Fuel system: | indirect injection |
Air cleaner: | dry |
Pre-heating: | glow plugs, block heater*Optional, coolant heater*Optional |
Compression: | 23.5:1 |
Rated RPM: | 3200 |
Operating RPM: | 1575-3370 |
Torque: | 40.7 lb-ft [55.2 Nm] |
Torque RPM: | 3200 |
Starter: | electric |
Starter volts: | 12 |
Starter power: | 1.6 hp [1.2 kW] |
Oil capacity: | 2.9 qts [2.7 L] |
Oil change: | 200 h |
Coolant capacity: | 3.9 qts [3.7 L] |
Engine Detail | |
Yanmar 3TNV80, diesel, 3-cylinder, liquid-cooled, 77.2 ci [1.3 L] |
info | |
Previous model: | John Deere 1026R |
Transmission | |
Type: | hydrostatic |
Gears: | infinite (2-range) forward and reverse |
Oil capacity: | 13 qts [12.3 L] |
info | |
Previous model: | John Deere 1026R |
Dimensions | |
Weight (shipping): | 1444 lbs [654 kg] |
Wheelbase: | 57.1 inches [145 cm] |
Length: | 87.6 inches [222 cm], 102.6 inches [260 cm] (with hitch) |
Width: | 47.2 inches [119 cm] (R3 tires) 47.3 (R4 tires) |
Height (hood): | 41.5 inches [105 cm] |
Height (ROPS): | 86.2 inches [218 cm] |
Clearance (front axle): | 7.7 inches [19 cm] |
Rear axle: | Flanged |
Front tread: | 32.2 inches [81 cm] |
Rear tread: | 35.2 inches [89 cm] |
John Deere 1025R Tires | |
Lawn/turf front: | 18x8.50-10 |
Lawn/turf rear: | 26x12-12 |
Industrial front: | 18x8.50-10 |
Industrial rear: | 26x12-12 |
info | |
Previous model: | John Deere 1026R |
54" Mower deck | |
Type: | mid-mount John Deere 54D |
Cutting width: | 54 inches [137 cm] |
60" Mower deck | |
Type: | mid-mount John Deere 60D 7-Iron |
Cutting width: | 60 inches [152 cm] |
Blade | |
Type: | front-mount John Deere |
Width: | 54 inches [137 cm] |
Loader | |
Loader type: | John Deere H120 |
Weight: | 541 lbs [245 kg] |
Height (to pin): | 71.2 inches [180 cm] |
Dump reach: | 22.5 inches [57 cm] |
Dump angle: | 40.1 |
Rollback angle: | 31.2 |
Breakout force (at pin): | 1819 lbs [825 kg] |
Breakout force (at 500mm): | 1245 lbs [564 kg] |
Lift to full height (at pin): | 836 lbs [379 kg] |
Lift to full height (at 500mm): | 576 lbs [261 kg] |
Lift to 1.5m (at pin): | 955 lbs [433 kg] |
Lift to 1.5m (at 500mm): | 686 lbs [311 kg] |
Bucket width: | 49 inches [124 cm], 53 inches [134 cm], 61 inches [154 cm] |
Backhoe | |
Backhoe type: | John Deere 260 |
Digging depth: | 74 inches [187 cm] |
Reach from pivot: | 104 inches [264 cm] |
Swing Arc: | 150 |
Bucket force: | 2036 lbs [923 kg] |
Dipperstick force: | 1187 lbs [538 kg] |