FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
| info | |
| 2011 - 2019 Sub-Compact 1 Series, Model years 2011-20152016-2019, Sub-Compact Utility tractor | |
| Series next: | John Deere 1026R |
| Production | |
| Manufacturer: | John Deere |
| Factory: | Augusta, Georgia, USA |
| Original price (USD), $11,296 (2011 ), $12,062 (2017 ), | |
| Capacity | |
| Fuel: | 5.6 gal [21.2 L] |
| Hydraulic system: | 3.25 gal [12.3 L] |
| 3-Point Hitch | |
| Rear Type: | Limited I |
| Rear lift (at ends): | 1,433 lbs [650 kg] |
| Rear lift (at 24"/610mm): | 681 lbs [308 kg] |
| Power Take-off (PTO) | |
| Rear PTO: | independent |
| Rear RPM: | 540 |
| Engine RPM: | 2100@3200 |
| Mid PTO: | independent |
| Mid RPM: | 2100 |
| Dimensions & Tires | |
| Wheelbase: | 57.1 inches [145 cm] |
| Weight: | 1,345 lbs [610 kg] |
| 1023E Serial Numbers | |
| Location: | On main tractor frame above the right-side front wheel. |
| John Deere 1023E Power | |
| Engine (gross): | 23.5 hp [17.5 kW] |
| PTO (claimed): | 15.3 hp [11.4 kW] |
| Mechanical | |
| Chassis: | 4x4 MFWD 4WD |
| Differential lock: | standard |
| Steering: | power |
| Brakes: | wet disc |
| Cab: | Two-post ROPS. |
| Hydraulics | |
| Type: | open center |
| Capacity: | 3.25 gal [12.3 L] |
| Pressure: | 2000 psi [137.9 bar] |
| Valves: | 2 to 3 |
| Total flow: | 6.3 gpm [23.8 lpm] |
| Electrical | |
| Ground: | negative |
| Charging system: | alternator |
| Charging amps: | 40 |
| Battery | |
| Number: | 1 |
| Cold-cranking amps: | 500 |
| Volts: | 12 |
| info | |
| Bore/Stroke: | 2.8x2.9 inches [71 x 74 mm] |
| Emissions: | Interim Tier IV |
| Rated Power (EC 97/98): | 23.5 hp [17.5 kW] |
| Fuel system: | indirect injection |
| Air cleaner: | dry dual stage |
| Pre-heating: | glow plugs |
| Rated RPM: | 3200 |
| Operating RPM: | 1400-3370 |
| Starter: | electric |
| Starter volts: | 12 |
| Oil capacity: | 2.9 qts [2.7 L] |
| Oil change: | 200 h |
| Coolant capacity: | 3.9 qts [3.7 L] |
| Coolant change: | 2000 h |
| Engine Detail | |
| Yanmar 3TNM72, diesel, 3-cylinder, liquid-cooled, 55.1 ci [0.9 L] |
| info | |
| JD Hy-Gard |
| Transmission | |
| Type: | hydrostatic |
| Gears: | infinite (2-range) forward and reverse |
| Oil capacity: | 13 qts [12.3 L] |
| Hydrostatic transmission operated by two foot pedals and left-hand range shift. Tractor must be stopped to shift range. | |
| info | |
| Series next: | John Deere 1026R |
| Dimensions | |
| Weight (operating): | 1,345 lbs [610 kg] |
| Front axle load: | 1,349 lbs [611 kg] |
| Rear axle load: | 1,576 lbs [714 kg] |
| Wheelbase: | 57.1 inches [145 cm] |
| Length: | 87.6 inches [222 cm], 102.6 inches [260 cm] (with hitch) |
| Width: | 47.2 inches [119 cm] (R3 tires) 47.3 (R4 tires) |
| Height (hood): | 41.5 inches [105 cm] |
| Height (ROPS): | 78.6 inches [199 cm] |
| Clearance (front axle): | 12.3 inches [31 cm] |
| Rear axle: | Flanged |
| Front tread: | 32.2 inches [81 cm] |
| Rear tread: | 35.2 inches [89 cm] |
| 4WD turn radius: | 7.4 feet [2.3 m] |
| John Deere 1023E Tires | |
| Lawn/turf front: | 18x8.5-10 |
| Lawn/turf rear: | 26x12.00-12 |
| Industrial front: | 18x8.5-10 |
| Industrial rear: | 26x12.00-12 |
| info | |
| Series next: | John Deere 1026R |
| 54" Mower deck | |
| Type: | mid-mount John Deere 54D AutoConnect |
| Cutting width: | 54 inches [137 cm] |
| 60" Mower deck | |
| Type: | mid-mount John Deere 60D AutoConnect |
| Cutting width: | 60 inches [152 cm] |
| Loader | |
| Loader type: | John Deere H120 |
| Weight: | 541 lbs [245 kg] |
| Height (to pin): | 71.2 inches [180 cm] |
| Dump reach: | 22.5 inches [57 cm] |
| Dump angle: | 40.1 |
| Rollback angle: | 31.2 |
| Breakout force (at pin): | 1819 lbs [825 kg] |
| Breakout force (at 500mm): | 1245 lbs [564 kg] |
| Lift to full height (at pin): | 836 lbs [379 kg] |
| Lift to full height (at 500mm): | 576 lbs [261 kg] |
| Lift to 1.5m (at pin): | 955 lbs [433 kg] |
| Lift to 1.5m (at 500mm): | 686 lbs [311 kg] |
| Bucket width: | 49 inches [124 cm], 53 inches [134 cm], 61 inches [154 cm] |