John Deere 940 Specifications - John Deere 940 Specs

info
1980 - 1986, Utility tractor
Series next: John Deere 1040
Series back: John Deere 840
Production
Manufacturer: John Deere
Factory: Mannheim, Baden-WГјrttemberg, Germany
Capacity
Fuel: 20.6 gal [78.0 L]
Hydraulic system: 10.8 gal [40.9 L]
3-Point Hitch
Rear Type: II/I
Rear lift: 4878 lbs [2212 kg]
Power Take-off (PTO)
Rear PTO: live, independent*Optional
Clutch: dry disc, wet disc*Optional, independent PTO
Rear RPM: 540
Engine RPM: 1000@2070
Front PTO: optional
Front RPM: 1000
Dimensions & Tires
Wheelbase: 74.4 inches [188 cm]
Weight: 5004 lbs [2269 kg]
Front tire: 6.50-16
Rear tire: 12.4-32
940 Serial Numbers
- Serial numbers unknown -
John Deere 940 Power
Engine: 42.9 hp [32.0 kW]
PTO (claimed): 38.9 hp [29.0 kW]
Mechanical
Chassis: 4x2 2WD
Final drives: planetary
Steering: power
Brakes: wet disc
Cab: Four-post ROPS.
Hydraulics
Type: closed center
Capacity: 10.8 gal [40.9 L]
Pressure: 2756 psi [190.0 bar]
Pump flow: 6.1 gpm [23.1 lpm]
Electrical
Ground: negative
Charging system: alternator
Charging amps: 33
Battery
Number: 2
Volts: 12
info
Bore/Stroke: 4.19x4.33 inches [106 x 110 mm]
Power: 42.9 hp [32.0 kW]
Compression: 16.8:1
Rated RPM: 2400
Operating RPM: 1300-2400
Starter volts: 12
Starter power: 4 hp [3.0 kW]
Oil capacity: 7.4 qts [7.0 L]
Coolant capacity: 11.1 qts [10.5 L]
Engine Detail
John Deere, diesel, 3-cylinder, liquid-cooled, 179 ci [2.9 L]
info
Series next: John Deere 1040
Series back: John Deere 840
Transmission
Type: collar shift
Gears: 8 forward and 4 reverse
Clutch: dry disc
info
Series next: John Deere 1040
Series back: John Deere 840
Dimensions
Weight (shipping): 5004 lbs [2269 kg]
Wheelbase: 74.4 inches [188 cm]
Length: 138 inches [350 cm]
Width: 65.4 inches [166 cm]
Height (ROPS): 94.1 inches [239 cm]
Height (exhaust): 103.1 inches [261 cm]
Clearance (front axle): 21 inches [53 cm]
Front tread: 49.6 to 79.5 inches [125 to 201 cm]
Rear tread: 53.5 to 73.2 inches [135 to 185 cm]
John Deere 940 Tires
Ag front: 7.50-16
Ag rear: 9.5-36