FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
info | |
The John Deere model 40 was the replacement for the M. The 40 variants included the 40S standard, utility, high-crop, 2-row utility, and a crawler model (the 40C). The 40C and the utility were used as industrial models, although there was no official John Deere designation for 40 industrial models. |
Production | |
Manufacturer: | John Deere |
Factory: | Dubuque, Iowa, USA |
Total built: | 18,000 |
Original price (USD): | $1,500 (1954) |
Variants | |
40C: | tracked tractor |
40H: | high-crop |
40S: | standard |
40T: | tricycle |
40V: | special |
40U: | utility |
40W: | two-row utility |
Capacity | |
Fuel: | 10.5 gal [39.7 L] |
Aux. fuel: | 0.9 gal [3.4 L] |
3-Point Hitch | |
Rear Type: | I |
Power Take-off (PTO) | |
Rear PTO: | transmission |
Rear RPM: | 540 |
Dimensions & Tires | |
Weight: | 2900 to 4553 pounds |
Front tire: | 5.00-15 |
Rear tire: | 9-24 |
Links | |
JD40.com: Detailed information, including service and tune-up, on the 40, 40 Industrial: Photos of industrial model 40s |
John Deere 40 Power | |
Drawbar (claimed): | 16.77 hp [12.5 kW] |
Belt (claimed): | 21.13 hp [15.8 kW] |
Drawbar (tested): | 21.71 hp [16.2 kW] |
Belt (tested): | 24.25 hp [18.1 kW] |
Mechanical | |
Chassis: | 4x2 2WD |
Steering: | manual |
Cab: | Open operator station. |
Belt Pulley | |
Diameter: | 9.1 inches [23 cm] |
Width: | 6.375 inches [16 cm] |
RPM: | 1267 |
Speed: | 3006 ft/min [916.23 meters/min] |
Electrical | |
Ground: | positive |
Battery | |
Number: | 1 |
Volts: | 6 |
info | |
Bore/Stroke: | 4.00x4.00 inches [102 x 102 mm] |
Air cleaner: | oil bath |
Compression: | 6.5:1 |
Rated RPM: | 1850 |
Firing order: | 1-2 |
Starter volts: | 6 |
Oil capacity: | 5 qts [4.7 L] |
Coolant capacity: | 14 qts [13.2 L] |
Engine Detail | |
John Deere, gasoline, 2-cylinder 4-valve, liquid-cooled, 100.5 ci [1.6 L] |
info | |
Previous model: | John Deere M |
Next model: | John Deere 420 |
Series next: | John Deere 50 |
Transmission | |
Manufacturer: | John Deere |
Type: | gear |
Gears: | 4 forward and 1 reverse |
Clutch: | dry disc |
info | |
Previous model: | John Deere M |
Next model: | John Deere 420 |
Series next: | John Deere 50 |
Dimensions | |
Weight (operating): | 2,900 lbs [1315 kg] (40S), 3,220 lbs [1460 kg] |
Weight (ballasted): | 4,189 lbs [1900 kg] (40S), 4,553 lbs [2065 kg] |
Length: | 130.625 inches [331 cm], 114.75 inches [291 cm] (40S) |
Width: | 89.75 inches [227 cm], 55.5 inches [140 cm] (40S) |
Height: | 58.75 inches [149 cm], 56 inches [142 cm] (40S) |
Front tread: | 39.125 to 54 inches (40S) [99 to 137 cm] (40S) |
Rear tread: | 47.25 to 96 inches (40T) [120 to 243 cm] (40T) 38.75 to 54.128 inches (40S) [98 to 137 cm] (40S) |
John Deere 40 Tires | |
Ag front: | 5.00-15, 6.00x16 |
Ag rear: | 9-24 (40S), 10-24 (40S/U), 11-24 (40S/U), 11-26 (40U), 13-26 (40U), 9-34 (40W/T/V), 10-34 (40W/V/T), 10-38 (40H), 11-38 (40H) |