Kubota L4850 Specifications - Kubota L4850 Specs

info
1991 - 1997, Utility tractor
Series next: Kubota L5450
Series back: Kubota L4350
Production
Manufacturer: Kubota
Capacity
Fuel: 15.9 gal [60.2 L]
Hydraulic system: 11.4 gal [43.1 L]
Front hubs: 2.9 qts [2.7 L] (each)
Front diff.: 6.6 qts [6.2 L]
3-Point Hitch
Rear Type: I
Rear lift (at ends): 3,300 lbs [1496 kg]
Rear lift (at 24"/610mm): 3,200 lbs [1451 kg]
Power Take-off (PTO)
Rear PTO: independent
Rear RPM: 540/750 (1.375)
Engine RPM: 540@2243 750@2391
Dimensions & Tires
Wheelbase: 76.4 inches [194 cm]
Weight: 4,080 lbs [1850 kg]
Front tire: 8.3-20
Rear tire: 13.6-28
L4850 Serial Numbers
Location: Left side of transmission housing, on operator platform.
- Serial numbers unknown -
Kubota L4850 Power
Engine (gross): 53 hp [39.5 kW]
PTO (claimed): 42 hp [31.3 kW]
Mechanical
Chassis: 4x4 MFWD 4WD
Steering: hydrostatic power
Brakes: wet disc
Cab: Two-post ROPS.
Hydraulics
Type: open
Capacity: 11.4 gal [43.1 L]
Pump flow: 11 gpm [41.6 lpm]
Electrical
Ground: negative
Battery
Number: 1
Volts: 12
Amp-hours: 110, 160 (optional)
info
Bore/Stroke: 3.3x3.6 inches [84 x 91 mm]
Power (gross): 53 hp [39.5 kW]
Rated RPM: 2600
Starter volts: 12
Starter power: 1.87 hp [1.4 kW]
Oil capacity: 8.5 qts [8.0 L]
Coolant capacity: 8.5 qts [8.0 L]
Engine Detail
Kubota F2503-DI, diesel, 5-cylinder, liquid-cooled, 152.5 ci [2.5 L]
info
Speeds: With 14.9-28 R1 rear tires.
Transmission
Type: mechanical shuttle
Gears: 8 forward and reverse
Clutch: dry disc
Oil capacity: 45.5 qts [43.1 L]
Four gears in two ranges with reverser lever.
info
Series next: Kubota L5450
Series back: Kubota L4350
Dimensions
Weight: 4,080 lbs [1850 kg] (ROPS)
Drawbar capacity: 2,200 lbs [997 kg]
Wheelbase: 76.4 inches [194 cm]
Length: 134.1 inches [340 cm]
Width: 67.3 inches [170 cm]
Height (steering wheel): 61.6 inches [156 cm]
Ground clearance: 13.4 inches [34 cm]
Front tread: 54 inches [137 cm]
Rear tread: 52 to 72 inches [132 to 182 cm]
Kubota L4850 Tires
Ag front: 8.3-20
Ag rear: 13.6-28
info
The Kubota L4850 was recommended with three 14-inch plows or two 16-inch. Rotary cutters up to 84-inches were recommended.