Kubota L2850 Specifications - Kubota L2850 Specs

info
1985 - 1990 L Series, Compact Utility tractor
Series back: Kubota L2550
Production
Manufacturer: Kubota
Capacity
Fuel: 7.7 gal [29.1 L]
Hydraulic system: 8.2 gal [31.0 L]
3-Point Hitch
Rear Type: I
Control: position and draft control
Rear lift (at ends): 2,425 lbs [1099 kg]
Rear lift (at 24"/610mm): 1,980 lbs [898 kg]
Power Take-off (PTO)
Rear PTO: continuous, live (optional)
Rear RPM: 540/1000
Mid PTO: optional
Mid RPM: 1080/2000
Dimensions & Tires
Wheelbase: 68.3 inches [173 cm]
Weight: 2480 to 2800 pounds
Front tire: 5.00-15
Rear tire: 12.4-24
L2850 Serial Numbers
Location: On tractor's clutch housing, left side
Kubota L2850 Power
Engine (gross): 34.0 hp [25.4 kW]
PTO (claimed): 27 hp [20.1 kW]
Drawbar (tested): 23.16 hp [17.3 kW]
PTO (tested): 27.51 hp [20.5 kW]
Mechanical
Chassis: 4x2 2WD, 4x4 MFWD 4WD
Differential lock: rear standard
Steering: manual, power*Optional equipment. Standard with Glide Shift.
Brakes: differential wet disc
Cab: Two-post ROPS. Optional sunshade.
Hydraulics
Type: open center
Capacity: 8.2 gal [31.0 L]
Pressure: 2275 psi [156.9 bar]
Valves: 1 to 3
Pump flow: 7.8 gpm [29.5 lpm]
Steering flow: 2.8 gpm [10.6 lpm]
Electrical
Ground: negative
Charging system: alternator
Charging amps: 35
Battery
Number: 1
Volts: 12
Amp-hours: 110
info
Bore/Stroke: 3.23x3.23 inches [82 x 82 mm]
Power (gross): 34.0 hp [25.4 kW]
Air cleaner: paper element
Compression: 18:1
Rated RPM: 2600
Starter volts: 12
Oil capacity: 8.9 qts [8.4 L]
Coolant capacity: 7.4 qts [7.0 L]
Engine Detail
Kubota V1702-DI-A, diesel, 4-cylinder, liquid-cooled, 105.7 ci [1.7 L]
info
Series back: Kubota L2550
Transmission
Type: mechanical shuttle
Gears: 8 forward and 7 reverse
Clutch: dry plates
Oil capacity: 32.8 qts [31.0 L]
Four gears with high and low ranges, and mechanical shuttle. Fourth gear is locked out in high range.
info
Series back: Kubota L2550
Dimensions
2WD Weight (shipping): 2480 lbs [1124 kg]
4WD Weight (shipping): 2710 lbs [1229 kg]
GST 4WD Weight (shipping): 2800 lbs [1270 kg]
4WD Weight (operating): 2790 lbs [1265 kg]
Weight (ballasted): 4580 lbs [2077 kg]
Wheelbase: 68.3 inches [173 cm]
Length: 114.2 inches [290 cm]
Width: 53.9 inches [136 cm]
Height (exhaust): 78.3 inches [198 cm]
Ground clearance: 14.0 inches [35 cm] (2WD), 13.6 inches [34 cm] (4WD)
Front tread: 45.3 to 57.1 inches (2WD) [115 to 145 cm] (2WD) 44.1 inches [112 cm] (4WD)
Rear tread: 41.3 to 59.6 inches [104 to 151 cm]
2WD turn radius: 7.9 feet [2.4 m] (with brakes)
4WD turn radius: 7.9 feet [2.4 m] (with brakes)
Kubota L2850 Tires
Ag front: 5.00-15 (2WD), 7-16 (4WD)
Ag rear: 12.4-24
info
A number of attachment were available for the Kubota L2850. In addition to a mid-mount mower, a rear 72 inch mower was available. Tillers were available in 40-inch (FL1021) and 50-inch (FL1271) sizes. A 65-inch box scaper was available along with the BL78 post hole digger.
72" Mower deck
Type: mid-mount Kubota RC72-28, 3-blade
Cutting width: 72 inches [182 cm]
Weight: 476 lbs [215 kg]
Overall width: 88.6 inches [225 cm]
Cut height: 1.5 to 4.5 inch [3 to 11 cm]
Loader
Loader type: Kubota BF500
Weight: 904 lbs [410 kg]
Height (to pin): 98.4 inches [249 cm]
Clearance, dumped bucket: 78.5 inches [199 cm]
Dump reach: 27 inches [68 cm]
Dump angle: 40
Reach at ground: 66.3 inches [168 cm]
Rollback angle: 24
Breakout force (lift): 1984 lbs [899 kg]
Lift to full height (at pin): 1102 lbs [499 kg]
Bucket width: 60 inches [152 cm]
Backhoe
Backhoe type: Kubota BL4530
Digging depth: 90 inches [228 cm]