Kubota L2550 Specifications - Kubota L2550 Specs

Overview
Engine
Transmission
Dimensions
Attachments
Manuals

info
1985 - 1991 L Series, Compact Utility tractor
Series next:	Kubota L2850
Series back:	Kubota L2250

Production
Manufacturer:	Kubota
Factory:	Japan

Variants
L2550F:	2WD
L2550DT:	4WD

Capacity
Fuel:	7.7 gal [29.1 L]
Hydraulic system:	8.2 gal [31.0 L]

3-Point Hitch
Rear Type:	I
Control:	position control, draft control*Optional
Rear lift (at ends):	2,425 lbs [1099 kg]
Rear lift (at 24"/610mm):	1,980 lbs [898 kg]

Power Take-off (PTO)
Rear PTO:	continuous, live*Optional
Rear RPM:	540/1000
Mid PTO:	optional
Mid RPM:	1080/2000

Dimensions & Tires
Wheelbase:	64.6 inches [164 cm]
Weight:	2250 to 2575 pounds
Front tire:	5.00-15
Rear tire:	11.2-24

L2550 Serial Numbers
Location:	Clutch housing on left side

Kubota L2550 Power
Engine (gross):	29.5 hp [22.0 kW]
PTO (claimed):	23.5 hp [17.5 kW]
Drawbar (tested):	19.96 hp [14.9 kW]
PTO (tested):	23.98 hp [17.9 kW]

Mechanical
Chassis:	4x2 2WD, 4x4 MFWD 4WD
Differential lock:	rear standard
Steering:	manual, power*Optional equipment. Standard with Glide Shift.
Brakes:	differential wet disc
Cab:	Two-post ROPS.

Hydraulics
Type:	open center
Capacity:	8.2 gal [31.0 L]
Pressure:	2275 psi [156.9 bar]
Valves:	1 to 3
Pump flow:	6.7 gpm [25.4 lpm]
Steering flow:	2.8 gpm [10.6 lpm]

Electrical
Charging system:	alternator
Charging amps:	35

Battery
Number:	1
Volts:	12
Amp-hours:	80

info
Bore/Stroke:	3.35x3.23 inches [85 x 82 mm]
Power (gross):	29.5 hp [22.0 kW]
Air cleaner:	paper element
Compression:	18:1
Rated RPM:	2600
Starter volts:	12
Oil capacity:	6.0 qts [5.7 L]
Coolant capacity:	5.3 qts [5.0 L]

Engine Detail
Kubota D1402-DI-A, diesel, 3-cylinder, liquid-cooled, 85.1 ci [1.4 L]

info
Series next:	Kubota L2850
Series back:	Kubota L2250

Transmission
Type:	mechanical shuttle
Gears:	8 forward and 7 reverse
Clutch:	dry plate
Oil capacity:	32.8 qts [31.0 L]
Four gears with high and low ranges, and mechanical shuttle. Fourth gear is locked out in high range.

info
Series next:	Kubota L2850
Series back:	Kubota L2250

Dimensions
2WD Weight (shipping):	2250 lbs [1020 kg]
4WD Weight (shipping):	2470 lbs [1120 kg]
GST 4WD Weight (shipping):	2557 lbs [1159 kg]
4WD Weight (operating):	2575 lbs [1168 kg]
Weight (ballasted):	3850 lbs [1746 kg]
Wheelbase:	64.6 inches [164 cm]
Length:	109.1 inches [277 cm]
Width:	51.4 inches [130 cm]
Height (exhaust):	78.5 inches [199 cm]
Ground clearance:	14.6 inches [37 cm] (2WD), 13.6 inches [34 cm] (4WD)
Front tread:	37.8 to 49.6 inches (2WD) [96 to 125 cm] (2WD) 44.1 inches [112 cm] (4WD)
Rear tread:	40.6 to 55.1 inches [103 to 139 cm]
2WD turn radius:	7.5 feet [2.3 m] (with brakes)
4WD turn radius:	7.5 feet [2.3 m] (with brakes)

Kubota L2550 Tires
Ag front:	5.00-15 (2WD), 7-16 (4WD)
Ag rear:	11.2-24

info
The Kubota L2550 could be fitted with a 65-inch box scraper or the BL78 post hole digger. Rear-mounted tillers were matched in 40-inch (FL1021) and 50-inch (FL1271) widths.

60" Mower deck
Type:	mid-mount Kubota RC60-25, 3-blade
Cutting width:	60 inches [152 cm]
Weight:	331 lbs [150 kg]
Overall width:	72.4 inches [183 cm]
Cut height:	1.5 to 4.0 inch [3 to 10 cm]

72" Mower deck
Type:	mid-mount Kubota RC72-25, 3-blade
Cutting width:	72 inches [182 cm]
Weight:	476 lbs [215 kg]
Overall width:	88.6 inches [225 cm]
Cut height:	1.5 to 4.5 inch [3 to 11 cm]

Loader
Loader type:	Kubota BF400G
Weight:	794 lbs [360 kg]
Height (to pin):	93.7 inches [237 cm]
Clearance, dumped bucket:	74.8 inches [189 cm]
Dump reach:	25.8 inches [65 cm]
Dump angle:	41
Reach at ground:	62 inches [157 cm]
Rollback angle:	21
Breakout force (lift):	1654 lbs [750 kg]
Lift to full height (at pin):	882 lbs [400 kg]
Bucket width:	60 inches [152 cm]

Backhoe
Backhoe type:	Kubota BL4530
Digging depth:	90 inches [228 cm]