Kubota B7200 Specifications - Kubota B7200 Specs

info
1983 - 1990, Compact Utility tractor
Previous model: Kubota B7100
Next model: Kubota B1550
Series next: Kubota B8200
Series back: Kubota B6200
Production
Manufacturer: Kubota
Factory: Japan
Original price (USD): $10,500 (1990 B7200HST-D)
Variants
B7200E: 2WD gear
B7200D: 4WD gear
B7200HST-E: 2WD hydro
B7200HST-D: 4WD hydro
Capacity
Fuel: 3.8 gal [14.4 L] (gear), 5.3 gal [20.1 L] (hydro)
Hydraulic system: 3.2 gal [12.1 L] (gear), 3.6 gal [13.6 L] (hydro)
3-Point Hitch
Rear Type: I
Rear lift (at ends): 1,036 lbs [469 kg]
Rear lift (at 24"/610mm): 705 lbs [319 kg]
Power Take-off (PTO)
Rear RPM: 540/825
Mid RPM: 1,546/2,455 (hydro)
Front PTO: optional
Front RPM: 2500
Dimensions & Tires
Wheelbase: 55.1 inches [139 cm] (gear), 57.9 inches [147 cm] (hydro)
Weight: 1113 to 1356 pounds
Front tire: 5.00-10
Rear tire: 8-16 (2WD)
B7200 Serial Numbers
Location: Right side of transmission case
Kubota B7200 Power
Engine (gross): 17 hp [12.7 kW]
PTO (claimed): 14 hp [10.4 kW]
Plows: 1 (12-inch)
Mechanical
Chassis: 4x2 2WD, 4x4 MFWD 4WD (B7200D)
Steering: manual
Brakes: dry internal expanding
Cab: Two-post ROPS.
Hydraulics
Type: open center
Capacity: 3.2 gal [12.1 L] (gear), 3.6 gal [13.6 L] (hydro)
Valves: 1
Total flow: 4 gpm [15.1 lpm]
Electrical
Charging system: alternator
Charging amps: 35 (optional)
Battery
Number: 1
Volts: 12
info
Bore/Stroke: 2.95x2.76 inches [75 x 70 mm]
Power (gross): 17 hp [12.7 kW]
Air cleaner: dry paper element
Rated RPM: 2500
Starter volts: 12
Oil capacity: 3.6 qts [3.4 L]
Coolant capacity: 3 qts [2.8 L]
Engine Detail
Kubota D950, diesel, 3-cylinder, liquid-cooled, 56.6 ci [0.9 L]
info
Speeds: With 8-16 rear tires.
Transmission
Type: gear
Gears: 6 forward and 2 reverse
Clutch: 7.2-inch dry disc
Oil capacity: 12.7 qts [12.0 L]
Three gears (1-3) plus reverse with high and low ranges.
info
Previous model: Kubota B7100
Next model: Kubota B1550
Series next: Kubota B8200
Series back: Kubota B6200
Dimensions
Weight (shipping): 1,113 lbs [504 kg] (B7200E), 1,256 lbs [569 kg] (B7200D), 1,213 lbs [550 kg] (B7200HST-E), 1,356 lbs [615 kg] (B7200HST-D)
Wheelbase: 55.1 inches [139 cm] (gear), 57.9 inches [147 cm] (hydro)
Length: 100 inches [254 cm] (gear), 102 inches [259 cm] (hydro)
Width: 44.9 inches [114 cm]
Height (exhaust): 71.5 inches [181 cm] (2WD), 72 inches [182 cm] (4WD)
Front tread: 28 inches [71 cm] (2WD)33.9 inches [86 cm] (4WD)
Rear tread: 29.1 to 35.8 inches [73 to 90 cm]
Kubota B7200 Tires
Standard tires (ag): Front: 5.00-10. Rear: 8-16 (2WD), Front: 6-12. Rear: 8-16 (4WD)
Optional tires (ag): Front: 5.00-10. Rear: 9.5-16
Lawn/turf front: 18x9.50-8 (2WD), 20x8.00-10 (4WD)
Lawn/turf rear: 29x12.00-15, 31x13.5-15
info
Mowers for the Kubota B7200 included the mid-mount RC-60-72 (front PTO mount for gear-driven tractors), the RC60-72H (mid PTO mount for hydrostatic tractors), and the B3538 48-inch rear-mounted finish mower. Three tillers were available: Kubota models FL850 (33.5 inch), B422 (42-inch), and the FL1000 (39.1 inch). Additional tillage tools included the B340 48-inch tandem disc harrow and B380 single-bottom (14-inch) moldboard plow. The B2551 snowblower could be front or rear mounted.
60" Mower deck
Type: Kubota RC60-72-H, 3-blade
Cutting width: 60 inches [152 cm]
Weight: mid lbs [0 kg]
Cut height: 1.5 to 4.0 inch [3 to 10 cm]
51" Snow blower
Type: front-mount Kubota B2551, dual-stage with hydraulic lift
Clearing width: 51 inches [129 cm]
Clearing height: 14 inches [35 cm]
Loader
Loader type: Kubota B1640A
Height (to pin): 69 inches [175 cm]
Clearance, dumped bucket: 53 inches [134 cm]
Dump reach: 19 inches [48 cm]
Dump angle: 42
Reach at ground: 43 inches [109 cm]
Rollback angle: 22
Breakout force (lift): 970 lbs [439 kg]
Lift to full height (at pin): 510 lbs [231 kg]
Bucket width: 42 inches [106 cm], 48 inches [121 cm], 54 inches [137 cm]