FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
| info | |
| 2004 - 2010, 2900 Series, Simplicity built |
| Production | |
| Distributor: | Massey Ferguson |
| Manufacturer: | Simplicity |
| The Massey Ferguson 2927H is the same as a Simplicity Legacy XL and the AGCO 2027H. | |
| Variants | |
| 2927H: | air-cooled engine |
| 2927: | liquid-cooled engine |
| Mechanical | |
| Chassis: | 4x2 2WD |
| Differential lock: | rear standard |
| Steering: | hydraulic power |
| Cab: | Open operator station. ROPS optional. |
| Transmission: | hydrostatic |
| Capacity | |
| Fuel: | 5.5 gal 20.8 L |
| Hydraulics | |
| Pressure: | 300 psi 20.7 bar |
| Pump flow: | 5.1 gpm 19.3 lpm |
| Tractor hitch | |
| Rear Type: | I (limited) |
| Rear lift (at 24"/610mm): | 350 lbs 158 kg |
| Power Take-off (PTO) | |
| Mid PTO: | independent |
| Mid RPM: | 2000 |
| Dimensions & Tires | |
| Wheelbase: | 55 inches 139 cm |
| Weight: | 830 lbs 376 kg |
| Front tire: | 18x8.5-8 |
| Rear tire: | 26x12.0-12 |
| Electrical | |
| Ground: | negative |
| Charging system: | alternator |
| Charging amps: | 15 |
| Battery | |
| Number: | 1 |
| Cold-cranking amps: | 500 |
| Volts: | 12 |
| info | |
| 2004 - 2010, 2900 Series, Simplicity built |
| Engine Detail | |
| Kohler Command, gasoline, 2-cylinder, air-cooled V-Twin | |
| Displacement: | 725 cc 44.24 ci |
| Power (gross): | 27 hp 20.1 kW |
| Rated RPM: | 3600 |
| Starter volts: | 12 |
| Oil capacity: | 2.1 qts 2.0 L |
| info | |
| Type F ATF |
| Transmission | |
| Transmission: | Tuff Torq K92 |
| Type: | shaft-driven hydrostatic |
| Gears: | infinite forward and reverse |
| Oil capacity: | 8 qts 7.6 L |
| Oil change: | 250 h |
| info | |
| 2004 - 2010, 2900 Series, Simplicity built |
| Massey Ferguson 2927H Tires | |
| Lawn/turf front: | 18x8.5-8 |
| Lawn/turf rear: | 26x12.0-12 |
| Dimensions | |
| Wheelbase: | 55 inches 139 cm |
| Length: | 81 inches 205 cm |
| Width: | 44.75 inches 113 cm |
| Height: | 51 inches 129 cm |
| Weight: | 830 lbs 376 kg |
| info | |
| 2004 - 2010, 2900 Series, Simplicity built |
| Attachment overview | |
| 48" mid-mount mower deck, 54" mid-mount mower deck, 60" mid-mount mower deck, Snowblower, Blade, Front-end loader |
| 48" Mower deck | |
| Type: | mid-mount Massey Ferguson, 3-blade |
| Cutting width: | 48 inches 121 cm |
| Belt: | shaft-drive |
| Weight: | 222 lbs 100 kg |
| Overall width: | 62 inches 157 cm |
| Cut height: | 1 to 5 inch 2 to 12 cm |
| 54" Mower deck | |
| Type: | mid-mount Massey Ferguson, 3-blade |
| Cutting width: | 54 inches 137 cm |
| Belt: | shaft-drive |
| Weight: | 230 lbs 104 kg |
| Overall width: | 64 inches 162 cm |
| Cut height: | 1 to 5 inch 2 to 12 cm |
| 60" Mower deck | |
| Type: | mid-mount Massey Ferguson, 3-blade |
| Cutting width: | 60 inches 152 cm |
| Belt: | shaft-drive |
| Weight: | 300 lbs 136 kg |
| Overall width: | 74 inches 187 cm |
| Cut height: | 1 to 5 inch 2 to 12 cm |
| Blade | |
| Type: | front-mount Massey Ferguson |
| Width: | 60 inches 152 cm |
| 46" Snow blower | |
| Type: | front-mount Massey Ferguson, single-stage |
| Clearing width: | 46 inches 116 cm |
| 47" Snow blower | |
| Type: | front-mount Massey Ferguson, dual-stage |
| Clearing width: | 47 inches 119 cm |
| Massey Ferguson Loader | |
| Loader weight: | 445 lbs 201 kg (without bucket) |
| Height (to pin): | 75.5 inches 191 cm |
| Clearance, dumped bucket: | 53 inches 134 cm |
| Dump reach: | 20.5 inches 52 cm |
| Dump angle: | 40° |
| Reach at ground: | 53 inches 134 cm |
| Rollback angle: | 25° |
| Breakout force (lift): | 900 lbs 408 kg |
| Lift to full height (at pin): | 380 lbs 172 kg |
| Bucket width: | 48 inches 121 cm |
| Raise time to height: | 5.0 s |
| Bucket dump time: | 3.0 s |
| Lowering time: | 4.0 s |
| Rollback time: | 3.0 s |