FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
info | |
Series: | 8680 |
Production | |
Manufacturer: | Massey Ferguson |
Type: | Row-Crop tractor |
Factory: | Beauvais, France |
Original price: | $231,833 (2009 ) |
Massey Ferguson 8680 Power | |
Engine: | 320 hp 238.6 kW |
PTO (claimed): | 275 hp 205.1 kW |
Drawbar (tested): | 240.7 hp 179.5 kW |
PTO (tested): | 322.6 hp 240.6 kW |
Massey Ferguson 8680 Engine | |
Fuel tank: | 155.9 gal 590.1 L (SCR), 182.3 gal 690.0 L (IEGR) |
Exhaust fluid (DEF): | 8 gal 30.3 L |
Mechanical | |
Chassis: | 4x4 MFWD 4WD |
Final drives: | inboard planetary |
Differential lock: | electro-hydraulic |
Steering: | power |
Brakes: | hydraulic wet disc |
Trailer brakes: | hydraulic*Optional, pneumatic*Optional |
Cab: | Cab standard with heat and air-conditioning. Optional heated seat, power adjustable mirrors, and automatic temperature control. |
Transmission: | continuously-variable transmission (CVT) |
Hydraulics | |
Type: | closed center load sensing |
Pressure: | 2,901 psi 200.0 bar |
Valves: | 4 to 6 |
Pump flow: | 26.4 gpm 99.9 lpm |
Total flow: | 46.2 gpm 174.9 lpm |
Tractor hitch | |
Rear Type: | III, IV |
Rear lift (at ends): | 26,460 lbs 12002 kg |
Rear lift (at 24"/610mm): | 21,336 lbs 9678 kg |
Front Hitch: | III |
Front lift (at ends): | 11,020 lbs 4998 kg |
Drawbar: | Cat. 3, Cat. 3 Heavy Duty (optional), Cat IV (optional) |
Power Take-off (PTO) | |
Rear PTO: | independent |
Clutch: | electro-hydraulic |
Rear RPM: | 1000E/1000 (1.75), 540E/1000 (1.375)*Optional |
Engine RPM: | 1000@1970 1000E@1605 |
Front PTO: | independent*Optional |
Front RPM: | 1000 (1.375) |
Dimensions & Tires | |
Wheelbase: | 122.2 inches 310 cm |
Weight: | 24,250 lbs 10999 kg |
Front tire: | 420/85R34 |
Rear tire: | 480/80R50 |
Electrical | |
Ground: | negative |
Charging system: | alternator |
Charging amps: | 240*Dual 120A alternators. |
Batteries: | 2 |
Battery CCA: | 775 |
Battery volts: | 12 |
info | |
Series: | 8680 |
Engine Detail | |
AGCO SISU POWER 84CTA, turbocharged intercooled diesel, 6-cylinder, liquid-cooled, The engine uses AGCO's e3 selective catalytic reduction (SCR) system to reduce nitrogen oxides (NOx). The system uses a diesel exhaust fluid that is injected into the exhaust gas. Engine optionally available with exhaust gas recirculation instead of SCR. | |
Displacement: | 512.6 ci 8.4 L |
Bore/Stroke: | 4.37x5.71 inches 111 x 145 mm |
Emissions: | Tier III |
Emission control: | selective catalytic reduction (SCR), integrated exhausted gas recirculation optional |
Power: | 320 hp 238.6 kW |
Maximum Power: | 350 hp 261.0 kW |
Fuel system: | electronic high pressure common rail |
Pre-heating: | thermostart |
Compression: | 16.7:1 |
Rated RPM: | 2200 |
Torque: | 1100 lb-ft 1491.6 Nm |
Torque RPM: | 1500 |
Starter: | electric |
Starter volts: | 12 |
info | |
Series: | 8680 |
Transmission | |
Transmission: | Dyna-VT |
Type: | continuously-variable transmission (CVT) |
Gears: | infinite forward and reverse |
info | |
Series: | 8680 |
Massey Ferguson 8680 Tires | |
Standard tires (ag): | Front: 420/85R34. Rear: 480/80R50 |
Dimensions | |
Wheelbase: | 122.2 inches 310 cm |
Length: | 223.2 inches 566 cm |
Height (cab): | 133.1 inches 338 cm |
Shiping weight: | 24,250 lbs 10999 kg |
Max weight: | 38,890 lbs 17640 kg |
Front axle: | Quadlink suspended |
Rear axle: | Bar: 4.33 by 118 inches 109 by 2997 mm |
Front tread: | 60.9 to 88.8 inches 154 to 225 cm |
Rear tread: | 58.5 to 119.5 inches 148 to 303 cm |
info | |
Series: | 8680 |
Massey Ferguson 985 Loader | |
Loader weight: | 1778 lbs 806 kg |
Height (to pin): | 189 inches 480 cm |
Clearance, dumped bucket: | 148 inches 375 cm |
Dump reach: | 22 inches 55 cm |
Dump angle: | 54° |
Rollback angle: | 40° |
Breakout force (lift): | 7319 lbs 3319 kg |
Lift to full height (at pin): | 5335 lbs 2419 kg |
Lift to full height (at 800mm): | 4696 lbs 2130 kg |
Bucket width: | 83 inches 210 cm, 95 inches 241 cm, 102 inches 259 cm |