FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
| info | |
| 1998 - 1999 200 Three Series, Utility tractor |
| Production | |
| Manufacturer: | Massey Ferguson |
| Factory: | Coventry, England |
| Original price (USD): | $25,000 (1999) |
| Capacity | |
| Fuel: | 12.6 gal [47.7 L] |
| Hydraulic system: | 11.4 gal [43.1 L] |
| 3-Point Hitch | |
| Rear Type: | II/I |
| Power Take-off (PTO) | |
| Rear PTO: | independent |
| Rear RPM: | 540 |
| Dimensions & Tires | |
| Wheelbase: | 75.1 inches [190 cm] (2WD), 76.7 inches [194 cm] (4WD) |
| Weight: | 5,110 lbs [2317 kg] |
| Front tire: | 6.00-16 |
| Rear tire: | 13.6-28 |
| 263 Serial Numbers | |
| - Serial numbers unknown - |
| Massey Ferguson 263 Power | |
| Engine (net): | 60 hp [44.7 kW] |
| PTO (claimed): | 53 hp [39.5 kW] |
| Drawbar (tested): | 42.4 hp [31.6 kW] |
| PTO (tested): | 53.0 hp [39.5 kW] |
| Mechanical | |
| Chassis: | 4x2 2WD, 4x4 MFWD 4WD |
| Steering: | hydrostatic power |
| Brakes: | independent wet disc |
| Cab: | Two-post folding ROPS. |
| Hydraulics | |
| Capacity: | 11.4 gal [43.1 L] |
| Pump flow: | 9.5 gpm [36.0 lpm], 13.9 gpm [52.6 lpm] (optional) |
| Electrical | |
| Ground: | negative |
| info | |
| Bore/Stroke: | 3.74x5.00 inches [95 x 127 mm] |
| Air cleaner: | dual paper elements |
| Compression: | 17.3:1 |
| Rated RPM: | 2250 |
| Starter volts: | 12 |
| Coolant capacity: | 10.8 qts [10.2 L] |
| Engine Detail | |
| Perkins 903.27T, turbocharged diesel, 3-cylinder, liquid-cooled, 165 ci [2.7 L] |
| Transmission | |
| Type: | sliding gear |
| Gears: | 8 forward and 2 reverse |
| Clutch: | dry disc |
| Four gears (1-4) plus reverse (R) in two ranges (low/high) | |
| Dimensions | |
| Weight (operating): | 5,110 lbs [2317 kg] |
| Wheelbase: | 75.1 inches [190 cm] (2WD), 76.7 inches [194 cm] (4WD) |
| Front tread: | 48 to 72 inches (2WD) [121 to 182 cm] (2WD) 51.4 to 63.6 inches (4WD) [130 to 161 cm] (4WD) |
| Rear tread: | 56 to 84 inches [142 to 213 cm] |
| Massey Ferguson 263 Tires | |
| Ag front: | 6.00-16 |
| Ag rear: | 13.6-28 |
| info | |
| The model 232 loader was compatible with the Massey Ferguson 243 with two-wheel drive. The model 1032 loader was compatible with four-wheel drive. |
| Loader | |
| Loader type: | Massey Ferguson 1032 |
| Height (to pin): | 121 inches [307 cm] |
| Clearance, dumped bucket: | 98 inches [248 cm] |
| Dump reach: | 20 inches [50 cm] |
| Dump angle: | 38 |
| Reach at ground: | 69 inches [175 cm] |
| Rollback angle: | 20 |
| Breakout force (at 800mm): | 2500 lbs [1134 kg] |
| Lift to full height (at pin): | 3200 lbs [1451 kg] |
| Lift to full height (at 800mm): | 2400 lbs [1088 kg] |
| Bucket width: | 72 inches [182 cm] |
| Raise time to height: | 5.8 s |
| Bucket dump time: | 5.7 s |
| Lowering time: | 4.0 s |
| Rollback time: | 4.3 s |