FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
info | |
1999 - 2003 200 Three Series, Utility tractor |
Production | |
Manufacturer: | Massey Ferguson |
Factory: | Coventry, England |
Original price (USD): | $20,050 (2003) |
Capacity | |
Fuel: | 12.7 gal [48.1 L] |
Hydraulic system: | 8.5 gal [32.2 L] |
3-Point Hitch | |
Rear Type: | II/I |
Power Take-off (PTO) | |
Rear PTO: | live (two-stage clutch), independent (optional) |
Rear RPM: | 540 |
Dimensions & Tires | |
2WD Wheelbase: | 75.1 inches [190 cm] |
4WD Wheelbase: | 76.1 inches [193 cm] |
Weight: | 5045 to 5130 pounds |
Front tire: | 6.00-16 |
Rear tire: | 13.6-28 |
Massey Ferguson 243 Power | |
Engine: | 52 hp [38.8 kW] |
PTO (claimed): | 47 hp [35.0 kW] |
Drawbar (tested): | 37.7 hp [28.1 kW] |
PTO (tested): | 47.6 hp [35.5 kW] |
Mechanical | |
Chassis: | 4x2 2WD, 4x4 MFWD 4WD |
Steering: | hydrostatic power |
Brakes: | independent wet disc |
Cab: | Two-post folding ROPS. |
Hydraulics | |
Capacity: | 8.5 gal [32.2 L] |
Pump flow: | 9.5 gpm [36.0 lpm], 13.9 gpm [52.6 lpm] (optional) |
Total flow: | 9.5 gpm [36.0 lpm], 13.9 gpm [52.6 lpm] optional |
Electrical | |
Ground: | negative |
Battery | |
Volts: | 12 |
info | |
Bore/Stroke: | 3.74x5.00 inches [95 x 127 mm] |
Power: | 52 hp [38.8 kW] |
Compression: | 17.3:1 |
Rated RPM: | 2250 |
Starter volts: | 12 |
Coolant capacity: | 11.2 qts [10.6 L] |
Engine Detail | |
Perkins 903.27, diesel, 3-cylinder, liquid-cooled, 165 ci [2.7 L] |
Transmission | |
Type: | sliding gear |
Gears: | 8 forward and 2 reverse |
Clutch: | dry disc |
Four gears (1-4) plus reverse (R) in two ranges (low/high) |
Dimensions | |
Weight (shipping): | 5,045 lbs [2288 kg] |
Weight (operating): | 5,130 lbs [2326 kg] |
2WD Wheelbase: | 75.1 inches [190 cm] |
4WD Wheelbase: | 76.1 inches [193 cm] |
Front tread: | 48 to 72 inches (2WD) [121 to 182 cm] (2WD) 51.4 to 63.6 inches (4WD) [130 to 161 cm] (4WD) |
Rear tread: | 56 to 84 inches [142 to 213 cm] |
Massey Ferguson 243 Tires | |
Ag front: | 6.00-16 |
Ag rear: | 13.6-28 |
info | |
The model 232 loader was compatible with the Massey Ferguson 243 with two-wheel drive. The model 1032 loader was compatible with four-wheel drive. |
Loader | |
Loader type: | Massey Ferguson 1032 |
Height (to pin): | 121 inches [307 cm] |
Clearance, dumped bucket: | 98 inches [248 cm] |
Dump reach: | 20 inches [50 cm] |
Dump angle: | 38 |
Reach at ground: | 69 inches [175 cm] |
Rollback angle: | 20 |
Breakout force (at 800mm): | 2500 lbs [1134 kg] |
Lift to full height (at pin): | 3200 lbs [1451 kg] |
Lift to full height (at 800mm): | 2400 lbs [1088 kg] |
Bucket width: | 72 inches [182 cm] |
Raise time to height: | 5.8 s |
Bucket dump time: | 5.7 s |
Lowering time: | 4.0 s |
Rollback time: | 4.3 s |