FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
| info | |
| Production of the Massey Ferguson 240 in the UK market began in 1979. North American production began in 1983. |
| Production | |
| Manufacturer: | Massey Ferguson |
| Factory: | Coventry, England |
| Original price (USD), $18,800 (1998 ), | |
| Capacity | |
| Fuel: | 12.6 gal [47.7 L] |
| Hydraulic system: | 8.6 gal [32.6 L] |
| 3-Point Hitch | |
| Rear Type: | II/I |
| Control: | position and draft control |
| Power Take-off (PTO) | |
| Rear PTO: | live (two-stage clutch) |
| Rear RPM: | 540 |
| Dimensions & Tires | |
| 2WD Wheelbase: | 76.1 inches [193 cm] |
| 4WD Wheelbase: | 77 inches [195 cm] |
| Weight: | 4015 to 4585 pounds |
| Front tire: | 6.00-16 |
| Rear tire: | 13.6-28 (2WD) |
| 240 Serial Numbers | |
| Location: | Instrument panel, lower right |
| Massey Ferguson 240 Power | |
| Engine: | 46 hp [34.3 kW] |
| PTO (claimed): | 41 hp [30.6 kW] |
| Drawbar (tested): | 28.69 hp [21.4 kW] |
| PTO (tested): | 34.77 hp [25.9 kW] |
| Mechanical | |
| Chassis: | 4x2 2WD, 4x4 MFWD 4WD |
| Steering: | hydrostatic power |
| Brakes: | mechanical drum (early), differential mechanical wet disc (late) |
| Cab: | Two-post ROPS. Canopy optional. |
| Hydraulics | |
| Type: | open |
| Capacity: | 8.6 gal [32.6 L] |
| Valves: | 2 |
| Pump flow: | 9.5 gpm [36.0 lpm] |
| Electrical | |
| Ground: | negative |
| Charging system: | alternator |
| Charging amps: | 32 |
| Battery | |
| Number: | 1 |
| Volts: | 12 |
| info | |
| Bore/Stroke: | 3.60x5.00 inches [91 x 127 mm] |
| Power: | 46 hp [34.3 kW] |
| Air cleaner: | dual dry element |
| Pre-heating: | ether (optional), block heater (optional) |
| Rated RPM: | 2000 |
| Starter volts: | 12 |
| Coolant capacity: | 10.4 qts [9.8 L] |
| Engine Detail | |
| Perkins AD3.152, diesel, 3-cylinder, liquid-cooled, 152 ci [2.5 L] |
| info | |
| Previous model: | Massey Ferguson 230 |
| Series next: | Massey Ferguson 250 |
| Transmission | |
| Type: | sliding gear |
| Gears: | 8 forward and 2 reverse |
| Tractor must be stopped, and clutch used, to shift gears. | |
| info | |
| Previous model: | Massey Ferguson 230 |
| Series next: | Massey Ferguson 250 |
| Dimensions | |
| 2WD Weight: | 4,015 lbs [1821 kg] |
| 4WD Weight: | 4,585 lbs [2079 kg] |
| 2WD Weight (operating): | 4,215 lbs [1911 kg] |
| Weight (ballasted): | 4,985 lbs [2261 kg] |
| 2WD Wheelbase: | 76.1 inches [193 cm] |
| 4WD Wheelbase: | 77 inches [195 cm] |
| 2WD Length: | 124.6 inches [316 cm] |
| 4WD Length: | 127.1 inches [322 cm] |
| Width: | 66.1 inches [167 cm] |
| 2WD Height (ROPS): | 87 inches [220 cm] |
| 4WD Height (ROPS): | 86 inches [218 cm] |
| 2WD Ground clearance: | 9.8 inches [24 cm] |
| 4WD Ground clearance: | 10.5 inches [26 cm] |
| Front tread: | 52 to 72 inches [132 to 182 cm] |
| Rear tread: | 52 to 76 inches [132 to 193 cm] |
| 2WD turn radius: | 10 feet [3.0 m] |
| 4WD turn radius: | 11.6 feet [3.5 m] |
| Massey Ferguson 240 Tires | |
| Standard tires (ag): | Front: 6.00-16. Rear: 13.6-28 (2WD), Front: 10.5/80-18. Rear: 14.9-24 (4WD) |
| info | |
| Previous model: | Massey Ferguson 230 |
| Series next: | Massey Ferguson 250 |
| Loader | |
| Loader type: | Massey Ferguson 236 |
| Height (to pin): | 125 inches [317 cm] |
| Clearance, dumped bucket: | 102 inches [259 cm] |
| Dump reach: | 33.5 inches [85 cm] |
| Dump angle: | 36 |
| Reach at ground: | 74 inches [187 cm] |
| Rollback at ground: | 10 |
| Breakout force (at pin): | 3420 lbs [1551 kg] |
| Lift to full height (at pin): | 2500 lbs [1134 kg] |
| Bucket width: | 72 inches [182 cm] |
| Raise time to height: | 8.7 s |
| Bucket dump time: | 5.6 s |
| Lowering time: | 4.2 s |
| Rollback time: | 3.2 s |