FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
| info | |
| 2015 - Workmaster Series, Utility tractor | |
| Previous model: | New Holland Workmaster 55 |
| Series next: | New Holland Workmaster 70 |
| Series back: | New Holland Workmaster 50 |
| Production | |
| Manufacturer: | New Holland (a part of CNH) |
| Original price (USD), $24,966 (2017 ), | |
| Capacity | |
| Fuel: | 13.8 gal [52.2 L] |
| 3-Point Hitch | |
| Rear Type: | II/I |
| Control: | position and draft control |
| Rear lift (at ends): | 3307 lbs [1500 kg] |
| Rear lift (at 24"/610mm): | 2701 lbs [1225 kg] |
| Rear Arms: | telescoping draft links |
| Power Take-off (PTO) | |
| Rear PTO: | independent |
| Clutch: | mechanical |
| Rear RPM: | 540, 540/540E*Optional |
| Dimensions & Tires | |
| 2WD Wheelbase: | 96.4 inches [244 cm] |
| 4WD Wheelbase: | 97.6 inches [247 cm] |
| Weight: | 4442 to 5059 pounds |
| Front tire: | 7.5x16 |
| 2WD Rear tire: | 14.9x28 |
| New Holland Workmaster 60 Power | |
| Engine: | 60 hp [44.7 kW] |
| PTO (claimed): | 51 hp [38.0 kW] |
| Mechanical | |
| Chassis: | 4x2 2WD, 4x4 MFWD 4WD |
| Steering: | power |
| Brakes: | wet disc |
| Cab: | Two-post folding ROPS. |
| Hydraulics | |
| Type: | open center |
| Valves: | 1 or 2 |
| Pump flow: | 12 gpm [45.4 lpm] |
| Total flow: | 17.5 gpm [66.2 lpm] |
| Steering flow: | 5.5 gpm [20.8 lpm] |
| Electrical | |
| Ground: | negative |
| Charging system: | alternator |
| Charging amps: | 75 |
| Battery | |
| Number: | 1 |
| Volts: | 12 |
| info | |
| Bore/Stroke: | 3.70x4.21 inches [94 x 107 mm] |
| Emissions: | Tier IV |
| Emission control: | exhaust gas recirculation with diesel particulate filter |
| Power: | 60 hp [44.7 kW] |
| Fuel system: | electronic high-pressure common rail direct injection |
| Rated RPM: | 2600 |
| Starter: | electric |
| Starter volts: | 12 |
| Engine Detail | |
| FPT R753, turbocharged diesel, 3-cylinder, liquid-cooled, 136 ci [2.2 L] |
| info | |
| Previous model: | New Holland Workmaster 55 |
| Series next: | New Holland Workmaster 70 |
| Series back: | New Holland Workmaster 50 |
| Transmission | |
| Type: | synchronized shuttle |
| Gears: | 8 forward and reverse |
| info | |
| Previous model: | New Holland Workmaster 55 |
| Series next: | New Holland Workmaster 70 |
| Series back: | New Holland Workmaster 50 |
| Dimensions | |
| 2WD Weight: | 4442 lbs [2014 kg] |
| 4WD Weight: | 5059 lbs [2294 kg] |
| 2WD Wheelbase: | 96.4 inches [244 cm] |
| 4WD Wheelbase: | 97.6 inches [247 cm] |
| 2WD Length: | 129.5 inches [328 cm] |
| 4WD Length: | 134 inches [340 cm] |
| Width: | 77.5 inches [196 cm] |
| Height (ROPS): | 97.6 inches [247 cm] |
| Rear axle: | Flange |
| New Holland Workmaster 60 Tires | |
| 2WD Standard tires (ag): | Front: 7.5x16. Rear: 14.9x28 |
| 4WD Standard tires (ag): | Front: 9.5x24. Rear: 14.9x28 |
| Industrial front: | 12.5x18 |
| Industrial rear: | 18.4x24 |
| info | |
| Previous model: | New Holland Workmaster 55 |
| Series next: | New Holland Workmaster 70 |
| Series back: | New Holland Workmaster 50 |
| Loader | |
| Loader type: | New Holland 626TL |
| Height (to pin): | 122 inches [309 cm] |
| Dump angle: | 46 |
| Rollback angle: | 45 |
| Breakout force (at 800mm): | 3527 lbs [1599 kg] |
| Lift to full height (at pin): | 2447 lbs [1109 kg] |
| Lift to full height (at 500mm): | 2734 lbs [1240 kg] |
| Lift to 1.5m (at 800mm): | 3130 lbs [1419 kg] |
| Backhoe | |
| Backhoe type: | New Holland 935GHB |