FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
| info | |
| 2017 - Workmaster Series, Compact Utility tractor | |
| Previous model: | New Holland Workmaster 37 |
| Series back: | New Holland Workmaster 35 |
| Production | |
| Manufacturer: | New Holland (a part of CNH) |
| Original price (USD), $20,554 (2017 shuttle ), $22,187 (2017 hydro ), | |
| Capacity | |
| Fuel: | 7.4 gal [28.0 L] |
| 3-Point Hitch | |
| Rear Type: | I |
| Control: | position control |
| Rear lift (at ends): | 1808 lbs [820 kg] |
| Rear lift (at 24"/610mm): | 1433 lbs [650 kg] |
| Power Take-off (PTO) | |
| Rear PTO: | independent |
| Clutch: | electro-hydraulic |
| Rear RPM: | 540 (1.375) |
| Dimensions & Tires | |
| Wheelbase: | 67.5 inches [171 cm] |
| Weight: | 3067 lbs [1391 kg] |
| Front tire: | 7x14 |
| Rear tire: | 11.2x24 |
| Workmaster 40 Serial Numbers | |
| - Serial numbers unknown - |
| New Holland Workmaster 40 Power | |
| Engine: | 40 hp [29.8 kW] |
| Gear PTO (claimed): | 34 hp [25.4 kW] |
| Hydro PTO (claimed): | 32 hp [23.9 kW] |
| Mechanical | |
| Chassis: | 4x4 MFWD 4WD |
| Steering: | power |
| Brakes: | wet disc |
| Cab: | Two-post folding ROPS. |
| Hydraulics | |
| Type: | open center |
| Valves: | 1 or 2 |
| Pump flow: | 8.2 gpm [31.0 lpm] |
| Gear Total flow: | 12.4 gpm [46.9 lpm] |
| Hydro Total flow: | 13.5 gpm [51.1 lpm] |
| Gear Steering flow: | 4.2 gpm [15.9 lpm] |
| Hydro Steering flow: | 5.3 gpm [20.1 lpm] |
| Electrical | |
| Ground: | negative |
| Charging system: | alternator |
| Charging amps: | 70 |
| Battery | |
| Number: | 1 |
| Volts: | 12 |
| info | |
| Bore/Stroke: | 3.465x4.055 inches [88 x 103 mm] |
| Emissions: | Tier IV |
| Emission control: | exhaust gas recirculation with diesel particulate filter |
| Power: | 40 hp [29.8 kW] |
| Fuel system: | electronic common rail direct injection |
| Rated RPM: | 2600 |
| Starter: | electric |
| Starter volts: | 12 |
| Engine Detail | |
| LS Mitron L3C19-T, turbocharged diesel, 3-cylinder, liquid-cooled, 114.7 ci [1.9 L] |
| info | |
| Previous model: | New Holland Workmaster 37 |
| Series back: | New Holland Workmaster 35 |
| Transmission | |
| Type: | synchronized shuttle |
| Gears: | 12 forward and reverse |
| Four gears in three ranges with mechanical shuttle | |
| info | |
| Previous model: | New Holland Workmaster 37 |
| Series back: | New Holland Workmaster 35 |
| Dimensions | |
| Weight: | 3067 lbs [1391 kg] |
| Wheelbase: | 67.5 inches [171 cm] |
| Length: | 121 inches [307 cm] |
| Width: | 66.5 inches [168 cm] |
| Height (ROPS): | 87.7 inches [222 cm] |
| Rear axle: | Flange |
| New Holland Workmaster 40 Tires | |
| Standard tires (ag): | Front: 7x14. Rear: 11.2x24 |
| Lawn/turf front: | 25x8.50-14 |
| Lawn/turf rear: | 41x14.00-20 |
| Industrial front: | 25x8.5-14 |
| Industrial rear: | 43x16.00-20 |
| info | |
| Previous model: | New Holland Workmaster 37 |
| Series back: | New Holland Workmaster 35 |
| Mower deck | |
| Type: | mid-mount New Holland 366GMS |
| Blade | |
| Type: | front-mount New Holland 72CHB |
| Width: | 72 inches [182 cm] |
| Snow blower | |
| Type: | front-mount New Holland 74SCHA |
| Loader | |
| Loader type: | New Holland 140TL |
| Height (to pin): | 91.5 inches [232 cm] |
| Dump angle: | 48 |
| Rollback angle: | 30.4 |
| Breakout force (at pin): | 2700 lbs [1224 kg] |
| Breakout force (at 500mm): | 1900 lbs [861 kg] |
| Lift to full height (at pin): | 1500 lbs [680 kg] |
| Lift to full height (at 500mm): | 1100 lbs [498 kg] |
| Backhoe | |
| Backhoe type: | New Holland 925GHB |