FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
| info | |
| 2007 - 2008 TT-A Series, Compact Utility tractor | |
| Next model: | New Holland Workmaster 55 |
| Series next: | New Holland TT60A |
| Series back: | New Holland TT45A |
| Production | |
| Manufacturer: | New Holland |
| Factory: | Dublin, Georgia, USA |
| Capacity | |
| Fuel: | 13.4 gal [50.7 L] |
| 3-Point Hitch | |
| Rear Type: | II/I |
| Control: | position control |
| Rear lift (at ends): | 2550 lbs [1156 kg] |
| Power Take-off (PTO) | |
| Rear PTO: | independent |
| Clutch: | mechanical dry disc |
| Rear RPM: | 540 (1.375) |
| Engine RPM: | 540@2555 |
| Dimensions & Tires | |
| Weight: | 3738 lbs [1695 kg] |
| New Holland TT50A Power | |
| Engine (gross): | 48 hp [35.8 kW] |
| PTO (claimed): | 42 hp [31.3 kW] |
| Mechanical | |
| Chassis: | 4x2 2WD |
| Final drives: | bull gear |
| Differential lock: | mechanical rear |
| Steering: | power |
| Brakes: | wet disc |
| Cab: | Platform with two-post folding ROPS. |
| Hydraulics | |
| Type: | open center |
| Pressure: | 2538 psi [175.0 bar] |
| Valves: | 0 to 2 |
| Pump flow: | 9.8 gpm [37.1 lpm] |
| Total flow: | 17.2 gpm [65.1 lpm] |
| Steering flow: | 7.4 gpm [28.0 lpm] |
| Electrical | |
| Ground: | negative |
| Charging system: | alternator |
| Charging amps: | 40 |
| Battery | |
| Number: | 1 |
| Cold-cranking amps: | 600 |
| Volts: | 12 |
| info | |
| Bore/Stroke: | 3.307x3.937 inches [84 x 100 mm] |
| Emissions: | Tier II |
| Power (gross): | 48 hp [35.8 kW] |
| Air cleaner: | dual dry elements |
| Pre-heating: | thermostart |
| Rated RPM: | 2800 |
| Starter volts: | 12 |
| Engine Detail | |
| Shibaura, diesel, 4-cylinder, liquid-cooled, 135.2 ci [2.2 L] |
| info | |
| Next model: | New Holland Workmaster 55 |
| Series next: | New Holland TT60A |
| Series back: | New Holland TT45A |
| Transmission | |
| Type: | gear |
| Gears: | 8 forward and 2 reverse |
| Clutch: | 279.4mm dry disc |
| info | |
| Next model: | New Holland Workmaster 55 |
| Series next: | New Holland TT60A |
| Series back: | New Holland TT45A |
| Dimensions | |
| Weight (shipping): | 3738 lbs [1695 kg] |
| Rear axle: | Flange |
| Front tread: | 52.2 to 68.7 inches [132 to 174 cm] |
| info | |
| Next model: | New Holland Workmaster 55 |
| Series next: | New Holland TT60A |
| Series back: | New Holland TT45A |
| Loader | |
| Loader type: | New Holland 610TL |
| Height (to pin): | 111.7 inches [283 cm] |
| Clearance, dumped bucket: | 93 inches [236 cm] |
| Dump reach: | 24.3 inches [61 cm] |
| Dump angle: | 42 |
| Rollback angle: | 20 |
| Breakout force (at 500mm): | 3400 lbs [1542 kg] |
| Lift to full height (at pin): | 1320 lbs [598 kg] |