FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
info | |
2004 - 2008 TN-A Series, Utility tractor | |
Previous model: | New Holland TN75 |
Series next: | New Holland TN85A |
Series back: | New Holland TN70A |
Production | |
Manufacturer: | New Holland |
Factory: | Jesi, Italy |
Variants | |
TN75A: | ROPS |
TN75DA: | cab |
TN75SA: | SuperSteer |
TN75FA: | narrow/orchard |
Capacity | |
Fuel: | 23 gal [87.1 L] |
3-Point Hitch | |
Rear Type: | II/I |
Rear lift (at 24"/610mm): | 3,960 lbs [1796 kg] |
Power Take-off (PTO) | |
Rear PTO: | independent |
Rear RPM: | 540 |
Dimensions & Tires | |
Wheelbase: | 81.5 inches [207 cm] (2WD), 78.9 inches [200 cm] (4WD) |
Weight: | 5020 to 7055 pounds |
TN75A Serial Numbers | |
- Serial numbers unknown - |
New Holland TN75A Power | |
Engine (gross): | 75 hp [55.9 kW] |
Engine: | 72 hp [53.7 kW] |
PTO (claimed): | 62 hp [46.2 kW] |
Drawbar (tested): | 54.7 hp [40.8 kW] |
PTO (tested): | 64.4 hp [48.0 kW] |
Mechanical | |
Chassis: | 4x2 2WD, 4x4 MFWD 4WD (optional) |
Steering: | hydrostatic power |
Brakes: | differential wet disc |
Cab: | ROPS. Canopy optional |
Hydraulics | |
Type: | open center |
Pressure: | 2755 psi [190.0 bar] |
Valves: | 1 to 4 |
Pump flow: | 16.9 gpm [64.0 lpm] |
Steering flow: | 7.4 gpm [28.0 lpm], 9.4 gpm [35.6 lpm] (with power shuttle) |
Electrical | |
Ground: | negative |
Charging system: | alternator |
Charging amps: | 65 |
Battery | |
Number: | 1 |
Cold-cranking amps: | 730 |
Volts: | 12 |
info | |
Bore/Stroke: | 4.094x4.528 inches [104 x 115 mm] |
Emissions: | Tier 2 |
Power: | 72 hp [53.7 kW] |
Power (gross): | 75 hp [55.9 kW] |
Fuel use: | 3.94 gal/hour [14.9 l/hour] |
Air cleaner: | dual paper elements |
Compression: | 16.5:1 |
Rated RPM: | 2300 |
Torque: | 220 lb-ft [298.3 Nm] |
Torque RPM: | 1400 |
Starter: | electric |
Starter volts: | 12 |
Engine Detail | |
Iveco, turbocharged diesel, 3-cylinder, liquid-cooled, 179 ci [2.9 L] |
info | |
Previous model: | New Holland TN75 |
Series next: | New Holland TN85A |
Series back: | New Holland TN70A |
Transmission | |
Type: | constant mesh with mechanical shuttle |
Gears: | 8 forward and reverse |
Clutch: | 280mm dry cerametallic plate |
Left-hand synchronized mechanical shuttle requires clutching. |
info | |
Previous model: | New Holland TN75 |
Series next: | New Holland TN85A |
Series back: | New Holland TN70A |
Dimensions | |
Weight (shipping): | 5,020 lbs [2277 kg] (2WD), 5,415 lbs [2456 kg] (4WD) |
Weight (operating): | 5,215 lbs [2365 kg] (2WD), 5,810 lbs [2635 kg] (4WD) |
Weight (ballasted): | 7,055 lbs [3200 kg] |
Wheelbase: | 81.5 inches [207 cm] (2WD), 78.9 inches [200 cm] (4WD) |
Length: | 153.3 inches [389 cm] (2WD), 151.6 inches [385 cm] (4WD) |
Width: | 67.2 inches [170 cm] |
Height (ROPS): | 95.1 inches [241 cm], 75.1 inches [190 cm] (folded) |
2WD turn radius: | 11.9 feet [3.6 m] |
4WD turn radius: | 12.5 feet [3.8 m] |
info | |
Previous model: | New Holland TN75 |
Series next: | New Holland TN85A |
Series back: | New Holland TN70A |
Loader | |
Loader type: | New Holland 32LC |
Weight: | 800 lbs [362 kg] (without bucket) |
Height (to pin): | 128 inches [325 cm] |
Clearance, dumped bucket: | 96 inches [243 cm] |
Dump reach: | 38 inches [96 cm] |
Dump angle: | 53 |
Rollback angle: | 38 |
Breakout force (lift): | 3900 lbs [1769 kg] |
Lift to full height (at 800mm): | 2600 lbs [1179 kg] |