FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
| info | |
| 2004 - 2008 TN-A Series, Utility tractor | |
| Previous model: | New Holland TN55 |
| Series next: | New Holland TN70A |
| Production | |
| Manufacturer: | New Holland |
| Factory: | Jesi, Italy |
| Variants | |
| TN60A: | ROPS |
| TN60DA: | cab |
| TN60SA: | SuperSteer |
| Capacity | |
| Fuel: | 23 gal [87.1 L] |
| 3-Point Hitch | |
| Rear Type: | II/I |
| Rear lift (at 24"/610mm): | 3,960 lbs [1796 kg] |
| Power Take-off (PTO) | |
| Rear PTO: | independent |
| Rear RPM: | 540 |
| Dimensions & Tires | |
| Wheelbase: | 81.5 inches [207 cm] (2WD), 78.9 (4WD) |
| Weight: | 5180 to 6460 pounds |
| Front tire: | 9.5x15 |
| Rear tire: | 14.9 |
| TN60A Serial Numbers | |
| - Serial numbers unknown - |
| New Holland TN60A Power | |
| Engine (gross): | 57 hp [42.5 kW] |
| Engine: | 55 hp [41.0 kW] |
| PTO (claimed): | 45 hp [33.6 kW] |
| Drawbar (tested): | 38.4 hp [28.6 kW] |
| PTO (tested): | 48.3 hp [36.0 kW] |
| Mechanical | |
| Chassis: | 4x2 2WD, 4x4 MFWD 4WD |
| Steering: | hydrostatic power |
| Brakes: | differential wet disc |
| Cab: | ROPS. Canopy optional. |
| Hydraulics | |
| Type: | open center |
| Pressure: | 2755 psi [190.0 bar] |
| Valves: | 1 to 4 |
| Pump flow: | 12.4 gpm [46.9 lpm], 16.9 gpm [64.0 lpm] (optional) |
| Steering flow: | 7.2 gpm [27.3 lpm], 9.2 gpm [34.8 lpm] (with power shuttle) |
| Electrical | |
| Ground: | negative |
| Charging system: | alternator |
| Charging amps: | 65 |
| Battery | |
| Number: | 1 |
| Cold-cranking amps: | 730 |
| Volts: | 12 |
| info | |
| Bore/Stroke: | 4.094x4.528 inches [104 x 115 mm] |
| Emissions: | Tier 2 |
| Power: | 55 hp [41.0 kW] |
| Power (gross): | 57 hp [42.5 kW] |
| Fuel use: | 3.00 gal/hour [11.4 l/hour] |
| Air cleaner: | dual paper elements |
| Compression: | 17:1 |
| Rated RPM: | 2300 |
| Torque: | 148 lb-ft [200.7 Nm] |
| Torque RPM: | 1400 |
| Starter volts: | 12 |
| Engine Detail | |
| New Holland, diesel, 3-cylinder, liquid-cooled, 179 ci [2.9 L] |
| info | |
| Previous model: | New Holland TN55 |
| Series next: | New Holland TN70A |
| Transmission | |
| Type: | constant mesh with mechanical shuttle |
| Gears: | 8 forward and reverse |
| Clutch: | 280mm dry cerametallic plate |
| Left-hand mechanical shuttle required clutching. | |
| info | |
| Previous model: | New Holland TN55 |
| Series next: | New Holland TN70A |
| Dimensions | |
| Weight: | 5,180 lbs [2349 kg] (2WD), 5,400 (4WD) |
| Weight (ballasted): | 6,460 lbs [2930 kg] |
| Wheelbase: | 81.5 inches [207 cm] (2WD), 78.9 (4WD) |
| Length: | 151.6 inches [385 cm] (4WD), 153.3 inches [389 cm] (2WD) |
| Width: | 67.2 inches [170 cm] |
| Height (ROPS): | 95.1 inches [241 cm], 75.1 inches [190 cm] (folded) |
| 2WD turn radius: | 11.8 feet [3.6 m] |
| 4WD turn radius: | 12.4 feet [3.8 m] |
| New Holland TN60A Tires | |
| Ag front: | 9.5x15 (2WD), 11.2x20 (4WD) |
| Ag rear: | 14.9 |
| info | |
| Previous model: | New Holland TN55 |
| Series next: | New Holland TN70A |
| Loader | |
| Loader type: | New Holland 32LC |
| Weight: | 800 lbs [362 kg] (without bucket) |
| Height (to pin): | 128 inches [325 cm] |
| Clearance, dumped bucket: | 96 inches [243 cm] |
| Dump reach: | 38 inches [96 cm] |
| Dump angle: | 53 |
| Rollback angle: | 38 |
| Breakout force (lift): | 3900 lbs [1769 kg] |
| Lift to full height (at 800mm): | 2600 lbs [1179 kg] |