FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
| info | |
| The New Holland TD5050 is the similar to the Case IH Farmall 95. |
| Production | |
| Distributor: | New Holland |
| Manufacturer: | Turk Tractor |
| Factory: | Ankara, Turkey |
| Variants | |
| TD5050HC: | high-crop |
| Capacity | |
| Fuel: | 23.8 gal [90.1 L], 30.8 gal [116.6 L] (optional) |
| 3-Point Hitch | |
| Rear Type: | II |
| Control: | mechanical lower-link draft sensing |
| Rear lift (at 24"/610mm): | 5,025 lbs [2279 kg] |
| Power Take-off (PTO) | |
| Rear PTO: | independent |
| Clutch: | 11-inch dry organic plate |
| Rear RPM: | 540, 540/1000 (optional) |
| Dimensions & Tires | |
| 2WD Wheelbase: | 94 inches [238 cm] |
| 4WD Wheelbase: | 91.8 inches [233 cm] |
| Weight: | 6702 to 8333 pounds |
| New Holland TD5050 Power | |
| Engine (gross): | 93 hp [69.4 kW] |
| PTO (claimed): | 80 hp [59.7 kW] |
| Drawbar (tested): | 74.4 hp [55.5 kW] |
| PTO (tested): | 80.7 hp [60.2 kW] |
| Mechanical | |
| Chassis: | 4x2 2WD, 4x4 MFWD 4WD (optional) |
| Cab: | Platform with ROPS. Cab optional with heat and air-conditioning. |
| Hydraulics | |
| Type: | open center fixed displacement gear pump |
| Pressure: | 2,755 psi [190.0 bar] |
| Rear valves: | 1 to 3 |
| Pump flow: | 16.1 gpm [60.9 lpm] |
| Total flow: | 25.6 gpm [96.9 lpm] |
| Steering flow: | 9.5 gpm [36.0 lpm] |
| Electrical | |
| Ground: | negative |
| Charging system: | alternator |
| Charging amps: | 65 |
| Battery | |
| Number: | 1 |
| Cold-cranking amps: | 800 |
| Volts: | 12 |
| info | |
| Bore/Stroke: | 4.094x5.196 inches [104 x 132 mm] |
| Emissions: | Tier 3 |
| Power (gross): | 93 hp [69.4 kW] |
| Fuel system: | direct injection |
| Air cleaner: | dual dry element |
| Compression: | 17.5:1 |
| Rated RPM: | 2500 |
| Torque: | 288 lb-ft [390.5 Nm] |
| Torque RPM: | 1300 |
| Starter volts: | 12 |
| Oil change: | 600 h |
| Engine Detail | |
| Iveco NEF, turbocharged diesel, 4-cylinder, liquid-cooled, 274 ci [4.5 L] |
| info | |
| Series back: | New Holland TD5030 |
| Transmission | |
| Type: | partially synchronized mechanical shuttle |
| Gears: | 12 forward and reverse |
| Clutch: | 305mm mechanical dry disc |
| Four gears in three ranges. Gear shifts are synchronized with the foot clutch. Tractor must be stopped, and clutch used, to shift ranges. | |
| info | |
| Series back: | New Holland TD5030 |
| Dimensions | |
| 2WD ROPS Weight (shipping): | 6,702 lbs [3040 kg] |
| 4WD ROPS Weight (shipping): | 7,804 lbs [3539 kg] |
| 2WD cab Weight (shipping): | 7,363 lbs [3339 kg] |
| 4WD cab Weight (shipping): | 8,333 lbs [3779 kg] |
| 2WD Front axle load: | 5,732 lbs [2600 kg] |
| 4WD Front axle load: | 6,613 lbs [2999 kg] |
| 2WD Wheelbase: | 94 inches [238 cm] |
| 4WD Wheelbase: | 91.8 inches [233 cm] |
| Height (ROPS): | 107.7 inches [273 cm] |
| Height (cab): | 102.4 inches [260 cm] |
| 2WD [140 to 190 cm] 2WD} 61.4 to 78.7 inches {4WD} [155 to 199 cm] {4WD} Front tread: | 55.2 to 74.9 inches |
| info | |
| The 810TL loader fits 2WD models while the 820TL fits 4WD models. Each loader is available with optional mechanical self-leveling (MSL). |
| Loader | |
| Loader type: | New Holland 820TL |
| Weight: | 990 lbs [449 kg], 1,150 lbs [521 kg] (MSL) |
| Height (to pin): | 136 inches [345 cm] |
| Clearance, dumped bucket: | 98 inches [248 cm] |
| Dump reach: | 36 inches [91 cm] |
| Dump angle: | 58, 57 (MSL) |
| Reach at ground: | 88 inches [223 cm] |
| Rollback angle: | 45 |
| Breakout force (at 800mm): | 3,100 lbs [1406 kg], 3,300 lbs [1496 kg] (MSL) |
| Lift to full height (at 800mm): | 2,500 lbs [1134 kg], 2,650 lbs [1202 kg] (MSL) |
| Lift to 1.5m (at 800mm): | 2,850 lbs [1292 kg], 3,100 lbs [1406 kg] (MSL) |