FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
| info | |
| 2014 - T9 Series, Four-wheel Drive (4WD) tractor | |
| Previous model: | New Holland T9.450 |
| Series next: | New Holland T9.530 |
| Series back: | New Holland T9.435 |
| Production | |
| Manufacturer: | New Holland |
| Factory: | Fargo, North Dakota, USA |
| Capacity | |
| Fuel: | 230 gal [870.6 L] |
| Exhaust fluid (DEF): | 42 gal [159.0 L] |
| Drawbar | |
| Drawbar: | Cat. 4 |
| 3-Point Hitch | |
| Rear Type: | IVN*Optional, IIIN*Optional |
| Control: | position control |
| Rear lift (at 24"/610mm): | 20000 lbs [9072 kg] |
| Rear Arms: | adjustable link ends |
| Power Take-off (PTO) | |
| Rear PTO: | independent |
| Rear RPM: | 1000 (1.75) |
| Dimensions & Tires | |
| Wheelbase: | 148 inches [375 cm] |
| Weight: | 36048 lbs [16351 kg] |
| Front tire: | 710/70 |
| Rear tire: | 710/70 |
| T9.480 Serial Numbers | |
| - Serial numbers unknown - |
| New Holland T9.480 Power | |
| Engine (gross): | 420 hp [313.2 kW] |
| Engine (max): | 462 hp [344.5 kW] |
| PTO (claimed): | 355 hp [264.7 kW] |
| Drawbar (tested): | 340.86 hp [254.2 kW] |
| PTO (tested): | 413.44 hp [308.3 kW] |
| Mechanical | |
| Chassis: | 4x4 articulated 4WD |
| Steering: | hydrostatic power articulated |
| Brakes: | wet disc |
| Trailer brakes: | hydraulic*Optional |
| Cab: | Cab standard with air-condioning. Optional Comfort Ride cab suspension. ISOBUS compliant, Intelliview IV, IntelliSteer |
| Hydraulics | |
| Type: | closed center load sensing (CCLS) |
| Valves: | 4 to 8 |
| Standard Pump flow: | 42 gpm [159.0 lpm] |
| High-Flow Pump flow: | 57 gpm [215.7 lpm] |
| MegaFlow Pump flow: | 113 gpm [427.7 lpm] |
| Electrical | |
| Ground: | negative |
| Charging system: | alternator |
| Charging amps: | 200 |
| Battery | |
| Number: | 2 |
| Cold-cranking amps: | 1000 |
| Volts: | 12 |
| info | |
| Bore/Stroke: | 5.31x5.91 inches [135 x 150 mm] |
| Emissions: | Tier IV |
| Emission control: | selective catalytic reduction with diesel oxidation catalyst |
| Rated Power (ECE R120): | 420 hp [313.2 kW] |
| Maximum Power (ECE R120): | 462 hp [344.5 kW] |
| Fuel system: | electronic direct-injection high pressure common rail |
| Cooling system: | viscous fan drive |
| Rated RPM: | 2100 |
| Torque: | 1469 lb-ft [1992.0 Nm] |
| Torque RPM: | 1400 |
| Starter: | electric |
| Starter volts: | 12 |
| Engine Detail | |
| FPT Cursor 13 SST, wastegate turbocharged aftercooled diesel, 6-cylinder 24-valve, liquid-cooled, 787 ci [12.9 L] |
| info | |
| Previous model: | New Holland T9.450 |
| Series next: | New Holland T9.530 |
| Series back: | New Holland T9.435 |
| Transmission | |
| Transmission: | Ultra Command |
| Type: | full power shift |
| Gears: | 17 forward and 2 reverse |
| info | |
| Previous model: | New Holland T9.450 |
| Series next: | New Holland T9.530 |
| Series back: | New Holland T9.435 |
| Dimensions | |
| Weight (shipping): | 36048 lbs [16351 kg] |
| Weight (max capacity): | 49500 lbs [22453 kg] |
| Wheelbase: | 148 inches [375 cm] |
| Length: | 291 inches [739 cm] |
| Width: | 120 inches [304 cm] *Minimum |
| Height (cab): | 151.3 inches [384 cm] |
| Front axle: | Bar: 5.0 by 120 inches [127x3048 mm] |
| Rear axle: | Bar: 5.0 by 120 inches [127x3048 mm] |
| New Holland T9.480 Tires | |
| Ag front: | 710/70 R42 |
| Ag rear: | 710/70 R42 |