FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
| info | |
| Standard-tread tractor |
| Production | |
| Manufacturer: | Upton |
| Factory: | Corowa, New South Wales, Australia |
| Dimensions & Tires | |
| Weight: | 18,500 lbs [8391 kg] |
| Front tire: | 11.00x16 |
| Rear tire: | 18.4x34 |
| 180 Serial Numbers | |
| - Serial numbers unknown - |
| Upton 180 Power | |
| Engine: | 180 hp [134.2 kW] |
| Mechanical | |
| Chassis: | 4x2 2WD |
| Hydraulics | |
| Pressure: | 2500 psi [172.4 bar] |
| Total flow: | 20 gpm [75.7 lpm] |
| info | |
| Bore/Stroke: | 4.33x5.118 inches [110 x 130 mm] |
| Power: | 180 hp [134.2 kW] |
| Compression: | 16:1 |
| Rated RPM: | 2400 |
| Torque: | 458 lb-ft [621.0 Nm] |
| Torque RPM: | 1400 |
| Engine Detail | |
| Two-stroke diesel engine., Nissan UD43, diesel, 4-cylinder, liquid-cooled, 302 ci [4.9 L] |
| Transmission | |
| Gears: | 21 forward and 9 reverse |
| The Upton 180 used military-surplus gear boxes. The first gearbox offered four-forward and one-reverse speed. The second gearbox offered five-forward and one-reverse gear. This arrangement offered 21 forward and nine reverse gear combinations. The original rear gearbox was a Spicer from the LVT-4 landing craft. Later, Mack gearboxes from the M3 tank were used. | |
| Dimensions | |
| Weight: | 18,500 lbs [8391 kg] |
| Length: | 180 inches [457 cm] |
| Width: | 153.75 inches [390 cm] |
| Height: | 88 inches [223 cm] |
| Ground clearance: | 16 inches [40 cm] |
| 2WD turn radius: | 16 feet [4.9 m] |
| Upton 180 Tires | |
| Ag front: | 11.00x16 |
| Ag rear: | 18.4x34, 18.4x38 |