FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
| info | |
| 2008 - 2011 Silver Series | |
| Series next: | Zetor 12050 |
| Series back: | Zetor 10050 |
| Production | |
| Manufacturer: | Zetor |
| Factory: | Brno, Czech Republic |
| Capacity | |
| Mech shuttle Fuel: | 40 gal [151.4 L] |
| Power shuttle Fuel: | 48 gal [181.7 L] |
| 3-Point Hitch | |
| Rear Type: | II/I |
| Control: | position and draft control |
| Rear lift (at ends): | 7600 lbs [3447 kg], 9150 lbs [4150 kg] *Optional |
| Power Take-off (PTO) | |
| Rear PTO: | independent |
| Clutch: | electro-hydraulic wet disc |
| Rear RPM: | 540/1000 (1.375) |
| Dimensions & Tires | |
| Mech shuttle Wheelbase: | 92 inches [233 cm] |
| Power shuttle Wheelbase: | 96 inches [243 cm] |
| Weight: | 8600 to 9030 pounds |
| Front tire: | 13.6R24 |
| Rear tire: | 18.4R34 |
| 11050 Serial Numbers | |
| - Serial numbers unknown - |
| Zetor 11050 Power | |
| Engine (gross): | 107 hp [79.8 kW] |
| Engine (net): | 101 hp [75.3 kW] |
| PTO (claimed): | 94 hp [70.1 kW] |
| Mechanical | |
| Chassis: | 4x4 MFWD 4WD |
| Differential lock: | mechanical rear, limited-slip front |
| Steering: | power |
| Brakes: | hydraulic wet disc |
| Cab: | Cab standard with air-condtioning. |
| Hydraulics | |
| Type: | open center |
| Pressure: | 2900 psi [200.0 bar] |
| Valves: | 3 |
| SCV flow: | 14 gpm [53.0 lpm] |
| Total flow: | 20 gpm [75.7 lpm] |
| Steering flow: | 6 gpm [22.7 lpm] |
| Electrical | |
| Ground: | negative |
| Charging system: | alternator |
| Charging amps: | 95 |
| Charging volts: | 12 |
| Battery | |
| Cold-cranking amps: | 950 |
| Volts: | 12 |
| info | |
| Bore/Stroke: | 4.13x4.72 inches [105 x 120 mm] |
| Power (gross): | 107 hp [79.8 kW] |
| Rated RPM: | 2200 |
| Starter: | electric |
| Starter volts: | 12 |
| Engine Detail | |
| Zetor, turbocharged diesel, 4-cylinder, liquid-cooled, 254 ci [4.2 L] |
| info | |
| Speeds: | With 18.4R34 rear tires. Reverse speeds are 6% faster than forward. |
| Transmission | |
| Type: | two-speed power shift |
| Gears: | 16 forward and reverse |
| Clutch: | 304.8mm hydraulic cerametallic disc |
| Synchronized transmission with two-speed push-button power shift and synchronized shuttle. | |
| info | |
| Series next: | Zetor 12050 |
| Series back: | Zetor 10050 |
| Dimensions | |
| Mech shuttle Weight: | 8600 lbs [3900 kg] |
| Power shuttle Weight: | 9030 lbs [4096 kg] |
| Mech shuttle Wheelbase: | 92 inches [233 cm] |
| Power shuttle Wheelbase: | 96 inches [243 cm] |
| Mech shuttle Length: | 153 inches [388 cm] |
| Power shuttle Length: | 157 inches [398 cm] |
| Width: | 78 inches [198 cm] *Minimum width |
| Height (cab): | 106 inches [269 cm] |
| Ground clearance: | 18 inches [45 cm] |
| Front tread: | 59 to 77 inches [149 to 195 cm] |
| Rear tread: | 59 to 71 inches [149 to 180 cm] |
| Zetor 11050 Tires | |
| Standard tires (ag): | Front: 13.6R24. Rear: 18.4R34 |
| info | |
| Series next: | Zetor 12050 |
| Series back: | Zetor 10050 |
| Loader | |
| Loader type: | Zetor 120SLi |
| Weight: | 2750 lbs [1247 kg] |
| Height (to pin): | 139 inches [353 cm] |
| Clearance, dumped bucket: | 100 inches [254 cm] |
| Dump reach: | 28 inches [71 cm] |
| Dump angle: | 70 |
| Reach at ground: | 92 inches [233 cm] |
| Rollback angle: | 45 |
| Breakout force (at pin): | 5000 lbs [2268 kg] |
| Breakout force (at 800mm): | 3800 lbs [1723 kg] |
| Lift to full height (at pin): | 3600 lbs [1632 kg] |
| Lift to full height (at 800mm): | 2400 lbs [1088 kg] |
| Bucket width: | 73 inches [185 cm] |
| Raise time to height: | 5 s |
| Bucket dump time: | 3.5 s |
| Rollback time: | 3.5 s |